It is an abbreviation from Tire Pressure Monitoring System.
It is necessary for well-timed, permanent informing about tire pressure state.
For safety of traffic, maximum life of tires and fuel economy.
We do not produce external sensors as far as the cannot cover the whole range of tasks of TPMS and have significant deficiencies in work, beginning from wrong pressure indications and ending with vandal resistance.
TPMS solves the problem of prompt notification about tire pressure. Wheel air inflating is another technical task.
Our system is designed for tubeless tires, as far as tubed tire immediately loses pressure.
Our system is a universal one, it suits both for truck and passenger vehicles. Only the valves are different.
No.
Degree Centigrade, Fahrenheit scale, Kpa, Bar, PSI.
1,400 KPa.
The system possesses a password that won’t let unauthorized persons connecting to the system.
Pressure, temperature, battery level, wheel rotation state.
Pressure measuring accuracy: ±0.20 kg/cm² at t=0-t=70, resolution: 0.05 kg/cm². Temperature measuring accuracy: ±3 degrees at t=0-t=70, resolution: 1 degree.
433Mhz + Bluetooth.
Temperature from -50℃ to +150℃.
The information is displayed on any Android or iOS device.
In case of standard operation the life of sensor battery is 7 years and more.
The sensor will be broken at the pressure exceeding 14 bar.
The operating life of external unit is at least 10 years.
In case of standard operation the life of sensor battery is 7 years and more.
The sensor goes into energy saving mode.
If required, we may arrange output into a separate display, but it will raise the cost of the system.
Electromagnetic and radio magnetic emission does not interfere with the system operability.
Bluetooth maintains simultaneous connection of up to 7 devices.
Signal strength from sensors is rated for 1 truck. To expand system acquisition range you may additionally install an antenna or an external unit.
Our external unit may act as a repeater. You can change its mode by a few touches.
Contact support service to get detailed information.
It is better, as it possesses unique propositions that cannot be offered by other manufacturers.
The sensor is installed on a special valve from the inner side of the disk.
No, external unit cannot be integrated with other sensors.
The sensor weights 25-30 grams, it does not exercise great influence on wheel balancing. It is compensated by 20-gram weight.
The temperature is from -50 to 150℃, the sensor is made of impact-resistant plastic.
Sensor and external unit are non-repairable. They may be only replaced.
Software may be installed on any Android or iOS device, you will need Bluetooth for your operations.
Yes, it is possible for Android devices.
You will need tire changing equipment for tire removal.
You will have to reinstall the program, all parameters will be saved.
Warranty period is 1 year, it is valid all over the world.
No. We impose too high requirements to technical characteristics of the sensor which overall majority of third-party sensors fails to meet.
The program is displayed at any display with any resolution.
Initially the program supports two languages: English and Russian, but we may add any language at your request.
You should contact support service and the language will be shortly added.
Today it is impossible to connect our sensors to built-in systems, but we are working over this problem.
World-wide warranty.
1 year.
1 year.
The warranty covers manufacturing defects.
You can find information about the car fleet at TK Cloud service.
You may install the program via Google Play Market and App Store. Soon it will be available in Windows Market.
More expensive packages are OEM systems that very often use cheaper parts.
It possesses a driver control function, informative data representation; any wheel arrangement may be used. It can work around the world (winter, summer, road, off-the-road). Possibility of installation at any tire shop.
The sensor is safely secured to the valve with the bolt, a washer and a grover.
In initial package all sensors are numbered for simpler installation. In case of wheels exchange the positions can be easily changed in the program.
To avoid possible damage you should start removing the tire right after the valve.
Our valves meet standard 9.7 mm diameter at rim seat for trucks and 11.5 mm for passenger vehicles. Other sizes are optional.
A standard hexagon wrench for sensor installation is supplied with the sensor.
Dust- and moistureproof case of the external unit allows locating it both inside and outside vehicle body.
An external unit may be installed onto a passenger or truck vehicle with voltage of 12/24V.
External unit for a passenger vehicle shall be connected to a cigarette lighter. In a truck it is installed outside and connected directly to the storage battery.
External unit may be connected to the splitter as far as input current does not exceed 0.05 amperes.
No, any rim servicing personnel may install and dismantle the sensor.
After dismantling the sensor goes into energy saving mode.
The system allows working with a truck with any number of trailers without additional settings.
When working with the trailer it is necessary to turn on relevant function in the program and select a necessary trailer.
A valve and a sensor are different devices. Sensor failure has no influence on the work of a valve.
Battery replacement is impossible, as far as only solid construction allows resisting loads in heavy weather and road conditions.
You can separately buy an external unit. Following the instructions you will be able to set it up without any problems.
Only an official dealer may deliver an opinion.
If the system has no reaction to change of pressure in the wheel, it means that the sensor is broken.
The system requires no aftersale service. In case of failure the parts will be replaced.
After positive expert opinion the component may be received from the nearest dealer or by mail.
If it is purchased at retail, then a certified dealer shall give such opinion.
Misusage of system components may cause their damage.
You can view information about the car fleet at TK Cloud service.
Yes. We are confident in the future of Android Auto, that is why we have developed our product for this system as well.
If required, we may arrange output into a separate display, but it will raise the cost of the system.
Bluetooth maintains simultaneous connection of up to 7 devices.
Software may be installed on any Android or iOS device, you will need Bluetooth for your operations.
Yes, it is possible for Android devices.
No. We impose too high requirements to technical characteristics of the sensor which overall majority of third-party sensors fails to meet.
Contact support service to get detailed information.
The program is displayed at any display with any resolution.
Initially the program supports two languages: English and Russian, but we may add any language at your request.
You should contact support service and the language will be shortly added.
Today it is impossible to connect our sensors to built-in systems, but we are working over this problem.
You may install the program via Google Play Market and App Store. Soon it will be available in Windows Market.
Yes. We are confident in the future of Android Auto, that is why we have developed our product for this system as well.
Degree Centigrade, Fahrenheit scale, Kpa, Bar, PSI.
1,400 KPa.
Pressure, temperature, battery level, wheel rotation state.
Pressure measuring accuracy: ±0.20 kg/cm² at t=0-t=70, resolution: 0.05 kg/cm². Temperature measuring accuracy: ±3 degrees at t=0-t=70, resolution: 1 degree.
433Mhz + Bluetooth.
Temperature from -50℃ to +150℃.
In case of standard operation the life of sensor battery is 7 years and more.
The sensor will be broken at the pressure exceeding 14 bar.
The operating life of external unit is at least 10 years.
In case of standard operation the life of sensor battery is 7 years and more.
The information is displayed on any Android or iOS device.
The sensor goes into energy saving mode.
If required, we may arrange output into a separate display, but it will raise the cost of the system.
Electromagnetic and radio magnetic emission does not interfere with the system operability.
Bluetooth maintains simultaneous connection of up to 7 devices.
Signal strength from sensors is rated for 1 truck. To expand system acquisition range you may additionally install an antenna or an external unit.
Contact support service to get detailed information.
Our external unit may act as a repeater. You can change its mode by a few touches.
No, external unit cannot be integrated with other sensors.
The sensor weights 25-30 grams, it does not exercise great influence on wheel balancing. It is compensated by 20-gram weight.
The temperature is from -50 to 150℃, the sensor is made of impact-resistant plastic.
Sensor and external unit are non-repairable. They may be only replaced.
Software may be installed on any Android or iOS device, you will need Bluetooth for your operations.
Yes, it is possible for Android devices.
No. We impose too high requirements to technical characteristics of the sensor which overall majority of third-party sensors fails to meet.
The program is displayed at any display with any resolution.
Initially the program supports two languages: English and Russian, but we may add any language at your request.
You should contact support service and the language will be shortly added.
Today it is impossible to connect our sensors to built-in systems, but we are working over this problem.
You may install the program via Google Play Market and App Store. Soon it will be available in Windows Market.
It is an abbreviation from Tire Pressure Monitoring System.
It is necessary for well-timed, permanent informing about tire pressure state.
For safety of traffic, maximum life of tires and fuel economy.
We do not produce external sensors as far as the cannot cover the whole range of tasks of TPMS and have significant deficiencies in work, beginning from wrong pressure indications and ending with vandal resistance.
TPMS solves the problem of prompt notification about tire pressure. Wheel air inflating is another technical task.
Our system is designed for tubeless tires, as far as tubed tire immediately loses pressure.
Our system is a universal one, it suits both for truck and passenger vehicles. Only the valves are different.
No.
The system possesses a password that won’t let unauthorized persons connecting to the system.
It is better, as it possesses unique propositions that cannot be offered by other manufacturers.
More expensive packages are OEM systems that very often use cheaper parts.
It possesses a driver control function, informative data representation; any wheel arrangement may be used. It can work around the world (winter, summer, road, off-the-road). Possibility of installation at any tire shop.
The sensor is installed on a special valve from the inner side of the disk.
The sensor is safely secured to the valve with the bolt, a washer and a grover.
In initial package all sensors are numbered for simpler installation. In case of wheels exchange the positions can be easily changed in the program.
To avoid possible damage you should start removing the tire right after the valve.
Our valves meet standard 9.7 mm diameter at rim seat for trucks and 11.5 mm for passenger vehicles. Other sizes are optional.
You will need tire changing equipment for tire removal.
You will have to reinstall the program, all parameters will be saved.
A standard hexagon wrench for sensor installation is supplied with the sensor.
Dust- and moistureproof case of the external unit allows locating it both inside and outside vehicle body.
An external unit may be installed onto a passenger or truck vehicle with voltage of 12/24V.
External unit for a passenger vehicle shall be connected to a cigarette lighter. In a truck it is installed outside and connected directly to the storage battery.
External unit may be connected to the splitter as far as input current does not exceed 0.05 amperes.
No, any rim servicing personnel may install and dismantle the sensor.
After dismantling the sensor goes into energy saving mode.
The system allows working with a truck with any number of trailers without additional settings.
When working with the trailer it is necessary to turn on relevant function in the program and select a necessary trailer.
A valve and a sensor are different devices. Sensor failure has no influence on the work of a valve.
Battery replacement is impossible, as far as only solid construction allows resisting loads in heavy weather and road conditions.
You can separately buy an external unit. Following the instructions you will be able to set it up without any problems.
Only an official dealer may deliver an opinion.
If the system has no reaction to change of pressure in the wheel, it means that the sensor is broken.
Warranty period is 1 year, it is valid all over the world.
World-wide warranty.
1 year.
1 year.
The warranty covers manufacturing defects.
The system requires no aftersale service. In case of failure the parts will be replaced.
After positive expert opinion the component may be received from the nearest dealer or by mail.
If it is purchased at retail, then a certified dealer shall give such opinion.
Misusage of system components may cause their damage.
You can find information about the car fleet at TK Cloud service.
You can view information about the car fleet at TK Cloud service.