1
Take the wheel off
Simple installation. Plain diagram.
Installation can be carried out at any vehicle maintenance point and requires no special tools. Everything required is included into a set.
There is no need to install sensors on all wheels at once. It takes time and requires each wheel dismantling. The sensors may be installed one by one in the process of maintenance and dismantling of the wheels. The system will keep on working properly even in case of partial installation.
Installation manual
You don’t have to search for a professional tire service center to install TireKeeper.
You may install the system at any tire shop that can replace the valve.
1
Take the wheel off
2
Unscrew an old valve
3
Unbend tire bead
4
Stop the tool holder in the area of the valve
5
Take out an old valve
6
Start installing a new valve
7
Support the valve and wrench-tighten it
8
Get the sensor screwed to the valve
9
Carefully low the bead so that not to damage the sensor
10
The sensor is installed